Filter
Top Products
Maintaining the Printer
93
Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the drum cartridge.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
Keep the printer level to avoid
toner spillage.
When lifting the printer, grasp
the areas shown in the figure.
" If you have the duplex option
or Tray 2 installed, remove
the option before lifting the
printer. Do not lift the printer
with the options.
If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
Make sure any parts removed during cleaning are replaced before you
plug in the printer.