Konica Minolta C10P Printer User Manual


 
Dual In-Line Memory Module (DIMM)
137
Dual In-Line Memory Module (DIMM)
A dual in-line memory module (or DIMM) is a compact circuit board with sur-
face-mount memory chips.
Your printer comes with 128 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 640 MB of RAM through the installation
of an additional unbuffered SDRAM DIMM. Your printer comes with one free
DIMM slot.
Required Memory during Printing
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 136. In addition,
always handle circuit boards by the edges only.
1 Turn off the printer and discon-
nect the power cord and inter-
face cables.
" If the duplex option is
installed, remove it.
Monochrome Full Color Full Color
Simplex / Duplex Simplex Duplex
Resolution Stan-
dard
High
Quality
Stan-
dard
High
Quality
Stan-
dard
High
Quality
Paper Size
Letter/A4 128 MB 128 MB 128 MB 128 MB 128 MB 256 MB
Legal 128 MB 128 MB 128 MB 256 MB 128 MB 384 MB