Filter
Top Products
Key Operator Mode 9-11
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
How to Access the ECM Setting Mode
Key Operator Mode Screen ECM Master Key Code Screen
ECM Setting Menu Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
If the Key Operator password is not valid, check with your service representative.
2Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays if a code
is required.
3 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then
touch OK to display the ECM Setting Menu Screen. (See note 2.)
4 Select the desired ECM function, and make settings as required.
To exit the ECM mode, touch RETURN on ECM Setting Menu Screen.
5Touch RETURN on the Key Operator Mode Screen to return to the Basic Screen.
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code. The ECM
master key code can be set to less than 8 digits by the Memory switch setting of the Key Operator
function.
HOME