Filter
Top Products
Key Operator Mode 9-41
Key Operator Mode
Finisher Adjustment [17] (continued)
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the Lower
arrow key.
2Touch [17] Finisher adjustment to display the Finisher Adjustment Menu Screen.
3Touch the desired menu key to display the adjustment screen for each function.
4 Make fine adjustment on the screen, then touch RETURN to restore the Finisher
Adjustment Menu Screen.
5Touch RETURN to restore the Key Operator Mode Screen.
6Touch RETURN to return to the Basic Screen and perform printing operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
Punch Unit Vertical Position Adjustment Screen Z-Folding Position Adjustment Menu Screen
1st Folding Position Adjustment Screen 2nd Folding Position Adjustment Screen
Three-Folding Position Adjustment Screen 2 Positions Staple Pitch Adjustment Screen
HOME