Filter
Top Products
Safety Information 2-5
Safety Information
Regulations
FCC Regulations
Warning:
The Konica Force 65 generates, uses, and can radiate radio frequency energy. If
it is not installed and used in accordance with the instruction manual, interference with
radio communications may result. This equipment has been tested and found to comply
with the limits for a Class A computing device, pursuant to Subpart B, Part 15, of FCC
rules, which are designed to provide reasonable protection against interference from such
equipment when it is operating in a commercial environment.
Users operating this equipment in a residential area are likely to cause interference, in
which case they may be required to correct the interference at their own expense.
Canadian Department of Communications Regulations
Le présent appareil n’émet pas de bruits radioélectriques dépassant les limites
applicables aux de Classe A prescrites dans le règlement sur la brouillage radioélectrique
édicté par Le Ministère des Communications du Canada.
This equipment does not exceed the Class A limits for radio noise emissions as set out in
the radio interference regulations of the Canadian ICES-003.
FDA Regulations
This Printer is certified as a “Class 1” laser product under the U.S. Department of Health
and Human Service (DHHS) Radiation Performance Standard according to the Radiation
Control for Health and Safety Act of 1968. Since radiation emitted inside this printer is
completely confined within protective housings and external covers, the laser beam cannot
escape during any phase of normal user operation.
HOME