Filter
Top Products
4 Changing the Device Setup
17
4.3.1 Setting up the Print Server
Perform the following steps to set up the print server for NetWare
printing.
1. Type up to 26 characters into the
Print Server Name
box for the
print server name.
Normally, you should leave the following items set to their initial
defaults. Change these settings only when absolutely necessary for
some reason.
Print Queue Scan Rate
Type in the interval, in seconds, to specify how often the print
server should check the queue.
Ethernet Frame Type
Specify the Ethernet frame type.
2. After you are finished configuring the setup, click the
Next
button.
Note
• To configure a NetWare print setup, the server must be bound to at least
one IPX frame.