Filter
Top Products
5 Peer-to-peer Print Setup
26
2. Select the
TCP/IP Connection
option under
Device List
to
display a list of network devices for which ports can be created.
To refresh the information in the
Device List
, click the button
under the list.
3. In the
Device List
, select the device you want to configure. If the
device you want to configure is not in the list, specify it manually.
See 5.1.2 Configuring for TCP/IP Peer-to-peer Printing by
Specifying the Device Manually.
4. Check the port number to be used for TCP/IP peer-to-peer printing
in the
Port Number
box. See 4.2 Configuring TCP/IP for details
about configuring a port number.
5. Click the
Add Port
button. Check the details of the setup in the
dialog box that appears.
6. If everything is the way you want, click the
OK
button.
7. When the
Success
dialog box appears, click
OK
.
The
P2P Setup
dialog box appears. See 5.3 After Creating the
Peer-to-peer Port.
Note
• The device may need to be reset after creating the port. In that case, a
dialog asking if you want to reset the device immediately will appear.