Filter
Top Products
6 Option Setup
37
To assign a particular hardware address to an IP address in the
Client List box:
1. From the
Client List
box, select the IP address that will be
assigned the hardware address.
2. Click the
Configure
button.
A dialog box for setting the hardware address appears.
3. Enter the hardware address into the
Hardware Address
box.
4. Click the
OK
button.
The setting appears in the
Client List
box.
To remove the setting for the IP address with a hardware address
assigned, delete any values entered into the
Hardware Address
box, and then click the
OK
button.
After specifying the BOOTP settings, click the
OK
button.
Note
• After sending the IP addresses to a device, the icon is displayed in
the
Client List
box. This mark means that the address was assigned
while the PageScope Network Setup is working.