Filter
Top Products
6 Option Setup
35
Specify IP discovery range:
Perform the steps below to specify the IP address range for the network
where the device is searched for. PageScope Network Setup searches
for devices on the broadcast address of the network specified here.
a. Type the IP address of the device you want to find into the
IP
Address
box.
b. Type the subnet mask used by the network into the
Subnet Mask
box.
c. Click the
Append
button.
d. The search range is set automatically in accordance with the
values you entered in the previous steps, and the resulting search
range appears in the
Discovery Range
box.
Add device manually:
A device that cannot be automatically searched for can be displayed in
the device list by entering its IP address.
a. Type the IP address of the device you want to display into the
IP
Address
box.
b. Click the
Append
button.
If the entered IP address is accessed and there is a response, that IP
address is added to the
Add Device
box.
To remove an address appearing in the
Add Device
box, select it,
and then click the
Delete
button.
4. If everything is the way you want, click the
OK
button.
5. On the confirmation dialog box that appears, click the
OK
button.