Filter
Top Products
5 Peer-to-peer Print Setup
30
5.2.2 Configuring for IPX Peer-to-peer Printing by
Specifying the Device Manually
Perform the following steps to specify the device manually when
configuring for IPX peer-to-peer printing. See 5.2.1 Configuring IPX
Peer-to-peer Printing for the procedure you should use when the
device you want to configure is included in the
Device List
on the
P2P
Setup
dialog box.
1. Select
P2P Setup
on the
Setup
menu to display the
P2P Setup
dialog box.
You could also click the toolbar button.
2. Click the
Manual P2P
button to display the
P2P Manual Setup
dialog box.
3. Under
IPX Connection
, click the device specification method you
want to use to select it. The following methods are supported.
• Print Server Name Specify the device using its print server
name. (You could verify the Print Server
Name in NetWare setting. See 4.3.1 Setting
up the Print Server)
• Network Address Specify the device using its IPX address.
4. Type the device destination into the text box that becomes enabled
to the right of the method you select.