Filter
Top Products
Installing a Windows Printer Driver
2
Pi3505e Printer Driver 2-7
Making General Settings Before Using the Printer
The printer driver requires setting of items that are common to all print
jobs, including the port to which the printer cable is connected and
optional devices configured with the machine. These settings must be
made using property sheets available from the Properties command after
the printer driver has been installed or whenever the operating
environment is changed.
The most common settings were made when the printer driver was
installed, meaning that you do not usually bother to change them. Some
items must, however, be changed in the following cases.
For details of “Using PCL Printer Driver Properties Tabs” on page 4-1.
✎
Note
Refer to the User Manual on the controller CD-ROM for information
about how to actually configure settings.
Cases where changes are necessary Applicable property tab
You want to add a comment to distinguish the printer
from others
General
You want to share the machine with other computers
connected to the same network (this setting must be
made on the computer directly connected to the
machine)
Sharing
The computer’s connecting port has been changed
You want to change the conditions for the display of a
timeout error
You want to designate a port to which the machine is
connected via a network (this setting must be made on
a computer connected to the machine via a network)
Ports
You want to restrict use condition of printer.
You want to change settings in spool condition.
You want to change OS-dependent settings.
Advanced
This setting is not related to printing. Color Management
You want to restrict access to the machine.
You want to check the accounts of the machine users.
Security