Filter
Top Products
4
Configuring PCL Printer Driver Properties for Windows
4-30 Pi3505e Printer Driver
(4) Size
Specify a font size in the range of 8 points to 200 points.
(5) Style
Use these settings to turn bold and italic style on or off.
• Bold Bold text
• Italic Italic text
(6) Shading
Specify the relative density of the watermark text, in the range of
5% to 100%.
(7) Angle
Use this setting to specify the angle of the watermark text relative
to the paper. You can specify Horizontal, Diagonal, Vertical, or
User Setting as the angle.
• User Setting These settings become available when User
Setting is selected for the angle setting. Use
them to configure settings that control the angle
of the watermark text. The setting range is -180°
to +180°.
A negative (-) value rotates the characters
clockwise, 0 specifies the text should be parallel
to the paper, and a positive (+) value rotates the
characters counter-clockwise.
(8) Position
Specify the position where the watermark text should be printed.
• Center Selecting this setting prints the watermark text
in the center of the paper.
• User Setting After selecting User Setting, you can specify a
position by using horizontal and vertical values.
Horizontal: -999 to 999 points
Vertical: 999 to 999 points
(72 points = 1 inch)
✎
Tip
Specify the position from the center. A positive Horizontal value
is to the right, while a positive Vertical value is upward. The
settings you make will be reflected in the dialog box’s preview
image.