Filter
Top Products
4
Configuring PCL Printer Driver Properties for Windows
4-12 Pi3505e Printer Driver
• Cover Paper
Source
Select the source for the front and back
cover paper.
Available settings:
Manual Feed, Tray1, Tray 2, Tray 3, Tray 4,
LCC
• Back Cover Page Select this check box to add a back cover.
• with Image Select this check box to print an image on
the back cover.
✎
Tip
The tray that will supply the paper for printing the main body of
the document is indicated green in the Printer Figure image.
(2) Interleaving Paper
OHP interleaving inserts sheets of paper (interleaving sheets)
between overhead projector transparencies when you are printing
on overhead projector transparencies.
• OHP Interleaving Select this check box when you want to turn
on OHP interleaving.
• OHP Interleaving
Paper Source
Click the down arrow button and select the
source tray of the interleaving paper.
Available settings:
Manual Feed, Tray 1, Tray 2, Tray 3, Tray 4,
LCC
✎
Note
Always specify “1” for the number of copies when using OHP
interleaving.
You cannot specify the same source for both Paper Source on
the Setup tab and Interleaving Paper Source on this dialog
box.
You cannot use OHP interleaving and two-sided printing at the
same time.
✎
Tip
The overhead projector transparencies tray is indicated green
in the Printer Figure image.