Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the SV-552 Processor/Switcher
6
PART II The SV-552 SummitView™ Processor/Switcher
PART II defines the SV-552 SummitView™ Processor/Switcher
4 Defining the SV-552 Processor/Switcher
The Kramer SV-552 SummitView™ Processor/Switcher is designed specifically for the
SummitView™ system and is an integral part of it. The SV-552 fits inside the SV-1
housing (optional) and can only be controlled via the default RC-63DL or via one of the
other (optional) Kramer K-Net™ compatible controllers. The SV-552 features Twisted
Pair video and audio inputs. It also has an IR output for video sources and features a
Master controller, as well as a power amplifier and audio line out. The SV-552 front
panel controls include six input selector buttons, three LEDs and a USB port. It receives
input signals via the RJ-45 connectors from the SV-301xl, SV-302, SV-306 and the
SV-307 wall plate devices.
The SV-552 RJ-45 TP inputs include:
• Two for video
• Three for computers
• One for HDMI
The SV-552 projector outputs include:
• VGA output on a 15-pin HD connector
• Composite video on an RCA connector
• HDMI with embedded audio on a DVI-D connector
In addition, the SV-552 features:
• Terminal blocks for unbalanced stereo audio speaker output
• Terminal blocks for Monitor and Line audio out
• Terminal blocks for an AUX input (Line or Mic level)
• 10V volume control
• Control relays
• RS-232 and RS-485
The SV-552 can be controlled by any of the following:
• One of Kramer's remote controllers (for example, RC-63DL) via the
proprietary communication K-Net channel
• Over a network connection via the Ethernet port
• Front panel input selector buttons
• The RC-4 IR Remote Controller or similar device