Filter
Top Products
Defining the SV-552 Processor/Switcher
9
# Feature Function
24 RS-485 Terminal Block Connect to the RS-485 detachable terminal block on a RS-485
controlled device
25 IR OUT Terminal Block Control a machine via an IR Emitter
26 CV RCA
Connector
OUTPUTS
TO
PROJECTOR
Connect to the composite video input of the projector
27 XGA 15-pin HD
Connector
Connect to the computer graphics or other display device input of the
projector
28 HDMI/DVI
INPUTS
RJ-45
Connectors
Connect to the HDMI/DVI acceptor
1
29 VIDEO 1 Connect to the video 1 source
VIDEO 2 Connect to the video 2 source
30 12V DC +12V DC connector for powering the unit
Figure 2 and Table 3 define the underside panel of the SV-552
SummitView™ Processor/ Switcher.
Figure 2: SV-552 SummitView™ Processor / Switcher Underside
Table 3: SV-552 SummitView™ Processor/Switcher Underside Features
#
Feature
Function
31 SERVICE Switch For technical support use only
32 FACTORY RESET Button Press and hold while powering up the unit to reset the audio, switching
and Ethernet settings to their factory default values
4.1 DDC Support
When establishing a VGA connection between a PC or laptop and a display
device, a set of parameters known as EDID which is carried over the DDC
channel is exchanged between them. With some PC graphic cards and laptops
1 Using a DVI/HDMI adapter or the Kramer C-HDMI/DVI HDMI to DVI Single Link (18 +1 pin) cable