Filter
Top Products
Defining and Connecting the Wall Plates
25
7.3 Connecting the Wall Plates to the SV-552
The wall plates are connected to the corresponding inputs on the SV-552
using the supplied
1
STP or optional BC-DGKat524 or BC-DGKat-623
cables (SV-306/307, see
Section 8.3
). The SV-301xl and the SV-302 U.S.
versions have RJ-45 CAT 5 connectors on the rear, as defined in
Table 14.
The SV-301xl and the SV-302 European versions have terminal blocks on the
rear, as defined in
Table 11 and Table 12 respectively.
The diagrams below show both U.S. and European versions for illustration
purposes only.
7.3.1 Connecting the SV-301xl Wall Plate to the SV-552
To connect the SV-301xl as the example in Figure 7 illustrates (see also the
separate color illustration in
Section 5.1):
Figure 7: Connecting the SV-301xl to the SV-552
1. Connect the computer graphics source (for example, a laptop) to the
Computer In 15-pin HD connector and to the unbalanced stereo Audio In
3.5mm mini jack on the front of the SV-301xl, for example, using a
1 There are two types of STP cable provided with SummitView™: CP-STP-50 (plenum-rated for the SummitView™ US) or
C-STP-50 (non-plenum for the SummitView™ Europe). Other STP cables can also be used. However, when using longer
STP cables, image quality may be impaired