Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-419 Video to SXGA/HD Scaler
2
Video inputs are de-interlaced and scaled to the selected PC or HDTV
resolutions, as follows:
VGA (640x480) SXGA (1280x1024) 720p
SVGA (800x600) 480p 1080i
XGA (1024x768) 576p
The VP-419
Video To SXGA/HD Scaler also features:
Automatic detection of NTSC, PAL-B, PAL-G, PAL-I, and PAL-D video
standards
On-Screen Display (OSD) for easy setup and adjustment
A high-performance adaptive 3D comb filter (for precise color
management)
Per-pixel motion compensated de-interlacing for artifact-free video
images
Automatic detection for 3:2 pulldown for 24fps film source material
Frame rate conversion of 50Hz to 60Hz for PAL input signals
A Vertical Temporal (VT) Filter for removing jagged artifacts
A built-in DCTI/DLTI circuit for color/luminance transient improvement
A PC Input connector for easy integration into an existing system
A non-volatile memory that retains the last settings used
Control your VP-419:
Directly, via the front panel push buttons
Remotely, from the infra-red remote control transmitter
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer VP-419 away from moisture, excessive sunlight and dust
4 Your VP-419 Video to SXGA/HD Scaler
Figure 1, Table 1 and Table 2 define the VP-419
Video To SXGA/HD Scaler: