Filter
Top Products
Your VP-419 Video to SXGA/HD Scaler
3
Figure 1: VP-419
Video To SXGA/HD Scaler – Front and Rear View
Table 1: Front Panel Features and Functions of the VP-419
Video To SXGA/HD Scaler
# Feature Function
1 Power Switch Switch for turning the unit ON or OFF
2 Power LED Lights when receiving power
3 IR Sensor Window Receives IR commands
4 Button Press to control or adjust the MODE and the PICTURE values
1
5 Button Press to control or adjust the MODE and the PICTURE values
1
6 Mode Button Displays the OSD screen and toggles through the Source, Resolution,
Output, Aspect, 3D Enhance, and Digital NR modes (see section 6.1.1)
7 Picture Button Press to toggle through the following picture adjustment parameters:
Contrast, Brightness, Color, Tint and Sharpness (see section 6.1.2)
Table 2: Rear Panel Features and Functions of the VP-419
Video To SXGA/HD Scaler
# Feature Function
8 s-VIDEO 4p Connector Connects to the s-Video source
9 VIDEO RCA Connector Connects to the composite video source
10 Y RCA Connector
11 Cb RCA Connector Connects to the interlaced
2
component video source
3
12 Cr RCA Connector
13
INPUTS
PC IN HD15 Connector Connects to the VGA/Y, Pb, Pr source
4
14 OUTPUT RGB / YPbPr HD15 Connector
Connects to the RGB or HDTV (component video) acceptor
15 DC 5V 5V DC connector for powering the unit
1 Press the
and the
arrows simultaneously to reset the unit to its factory default settings
2 Not compatible with progressive scan Y, Pb, Pr or HDTV
3 For component video, connect all 3 connectors: Y, Cb, Cr (also known as YUV)
4 This PC input signal is not scaled, but is available for pass-through when the PC source is selected