Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VP-419
6
6.2 Controlling via the Infra-Red Remote Control Transmitter
You can control the VP-419 from the infra-red remote control transmitter, as
Figure 3 and Table 5 define:
Table 5: Infra-Red Remote Control Transmitter
Functions
Keys Function
POWER Turn power ON or OFF
DISPLAY Turn resolution information OSD ON or OFF
C-VIDEO Select the composite video input
S-VIDEO Select the s-Video input
YCbCr Select the component video input
PC Select the input PC to loop-through
VGA Set the output resolution to 640x480
SVGA Set the output resolution to 800x600
XGA Set the output resolution to 1024x768
SXGA Set the output resolution to 1280x1024
480p Set the output resolution to 852x480p
576p Set the output resolution to 852x576p
720p Set the output resolution to 1280x720p
1080i Set the output resolution to 1920x1080i
ASPECT Select the normal (4:3) or the wide (16:9) aspect
ratio
IR SET Not used
3D Turn the 3D enhance feature ON or OFF
NR Turn the digital noise reduction feature ON or
OFF
MODE Toggles between each of the following modes:
source, resolution, output, aspect, 3D enhance,
and Digital NR
RESET
MODE
NR
PC
YPbCr
S-VIDEO
C-VIDEO
3D
IR SET
ASPECT
SXGA
SVGA
VGA XGA
576p 720p 1080i
480p
PICTURE
Figure 3: Infra-Red Remote
Control Transmitter
PICTURE Toggle through the following picture adjustment
parameters: contrast, brightness, color, tint and
sharpness
Press to control or set picture parameters
RESET Not used