Filter
Top Products
VP-725NA – Overview 9
Front Panel
# Feature Function
1
INPUT
SELECT
OR
Buttons
YC Selects one of the s-Video (Y/C) sources (from 1 to 4)
2 CV Selects one of the CV sources (from 1 to 4)
3 UXGA Selects one of the UXGA sources (from 1 to 4)
4 HDMI Selects one of the HDMI sources (from 1 to 4)
5 USB Press to select the USB source
JPEG files on a USB memory stick, up to a maximum size of 2048x1536
6 COMP Selects one of the component video sources (from 1 to 4)
7 POWER Switch Illuminated switch for turning the unit ON or OFF
8 IR Receiver/LED Green when ON; red when OFF
OFF in this case means that the outputs and the front-panel are disabled
9 FREEZE Button Freezes the output video image
Applicable to the Scaler outputs only
10 PIP Button Selects the picture-in-picture function (see Section 6.4 )
11 MENU Button Displays the OSD Menu screen (or returns to the previous level in the OSD screen)
12 ENTER Button Moves to the next level in the OSD screen
Press for about 3 seconds to lock/unlock the front panel buttons
13 - Button Decreases the range by one step
14 + Button Increases the range by one step
15 DOWN Button Moves down one step (in the same level) in the OSD screen
16 UP Button Moves up one step (in the same level) in the OSD screen
17 USB Connector Connect to a USB drive to read JPEG files
18 OSD ON Button Activates/deactivates access to the OSD Menu
The OSD ON front panel button is activated (illuminated) by default, and pressing the MENU front panel
button (or the MENU key on the infrared remote control transmitter (see
Figure 29)) displays the OSD
Menu. To prevent OSD display, press the OSD ON front panel button (or the OSD key). The front panel
button no longer illuminates, and the front panel LCD now operates independently of the OSD (when the
OSD is OFF, the LCD is still operational)
19 LCD Status Display Displays the status