Filter
Top Products
VP-725NA - Configuring and Controlling the VP-725NA 43
Misc Setup Screen
Setting Function Default
HDCP
Setting
Define whether the HDCP follows the input or the output: Follow
Input, Follow Output
When Follow Input is selected, the Scaler changes its HDCP output
setting (for the HDMI output) according to the HDCP of the input. This
option is recommended when the HDMI Scaler output is connected to
a splitter/switcher (in this mode, switching may not be glitch-free)
When Follow Output is selected, the Scaler matches its HDCP output
to the HDCP setting of the HDMI acceptor to which it is connected.
This ensures smooth switching, regardless of the input
Follow
output
Overscan Allows stretching of the outputted picture: On, Off
Enabled only for HD input resolutions
Off
Figure 24: Input Setup Screen
Input Setup Screen
Setting Function Range Default
HT Horizontal Total 1344
HW Horizontal sync pulse width 136
HS Horizontal active start point 296
HA Horizontal active region 1024
HP Horizontal polarity
VT Vertical Total 806
VW Vertical sync pulse width 6
VS Vertical active start point 35
VA Vertical active region 768
VP Vertical polarity
OCLK Output clock 65
Enable off
Apply Press to apply settings
N/A