Filter
Top Products
14 VP-725NA - Connecting the VP-725NA Presentation Switcher/Scaler
5 Connecting the VP-725NA Presentation
Switcher/Scaler
This section describes how to connect the VP-725NA. In particular, how to
connect the:
• VP-725NA rear panel (see Section
5.1)
• Interlaced and progressive RGBS and RGsB inputs (see Section
5.2)
• PC (see Section
5.3)
• Ethernet port (see Section
5.4)
• Audio inputs/outputs (see Section
5.5)
Using the VP-725NA you can select any one of the 21 inputs and scale that input
to up to three scaled outputs (at the identical resolution).
5.1 Connecting the VP-725NA
To connect the VP-725NA, connect the following to the rear panel, as the example
in
Figure 3 illustrates:
Always switch off the power to each device before connecting it to your
VP-725NA. After connecting your VP-725NA, connect its power and
then switch on the power to each device.
1. Connect one or more of the following video sources:
Up to four UXGA graphics sources (for example, computers) to the
15-pin HD input connectors
These connectors also accept interlaced and progressive RGBS and RGsB
signals (see Section
5.2)
Up to four composite video sources (for example, DVD players) to the
BNC input connectors
Up to four s-Video sources to the 4-pin input connectors (not illustrated
in
Figure 3)
i