Filter
Top Products
Connecting a VS-42H 4x2 HDMI Matrix Switcher
9
6 Connecting a VS-42H 4x2 HDMI Matrix Switcher
To connect the VS-42H 4x2 HDMI Matrix Switcher, as illustrated in the
example in
Figure 2, do the following
1
1. Connect
:
2
2. Connect
up to four HDMI sources (for example, DVD players) to the four
IN HDMI connectors.
3
3. If required, connect a PC and/or controller to the RS-232 port (see
section
the OUT 1 and OUT 2 HDMI connectors to up to two HDMI
acceptors (for example, LCD displays with built-in speakers).
7.3) and/or the ETHERNET port (see section 7.4).
4. Connect the power connector to the mains electricity (not shown in
Figure 2).
5. If required, acquire the EDID (see section
7.1)
Press an INPUT SELECTOR button (two sets of buttons
4
1 Switch OFF the power on each device before connecting it to your VS-42H. After connecting your VS-42H, switch on its
power and then switch on the power on each device
from 1 to 4) to
choose which HDMI input to route to the outputs.
2 You do not have to connect all the HDMI sources
3 You do not have to connect both outputs
4 TO OUTPUT 1 and TO OUTPUT 2