Filter
Top Products
Your VS-42H 4x2 HDMI Matrix Switcher
7
Table 2: VS-42H 4x2 HDMI Matrix Switcher Front Panel Features
#
Feature
Function
1 IR Receiver The red LED lights when receiving signals from the
Infra-red remote control transmitter
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 INPUT SELECTOR
Buttons
TO OUTPUT 2 Press an INPUT SELECTOR button to select an input
(from 1 to 4) to switch to output 2
4 TO OUTPUT 1 Press an INPUT SELECTOR button to select an input
(from 1 to 4) to switch to output 1
5 OFF Buttons TO OUTPUT 1 Press to toggle disconnecting output 1
6 TO OUTPUT 2 Press to toggle disconnecting output 2
7 EDID Button
1
Press to acquire the EDID
8 STO Button Press to store an input setting
9 RCL Button Press to recall an input setting
10 LOCK Button Press to toggle disengaging the front panel buttons and
to acquire the EDID (see section
7.1)
Table 3: VS-42H 4x2 HDMI Matrix Switcher Rear Panel Features
#
Feature
Function
11 IN HDMI Connectors Connect to the HDMI sources (from 1 to 4)
12 OUT 1 HDMI Connector Connect to the HDMI acceptor 1
13 OUT 2 HDMI Connector Connect to the HDMI acceptor 2
14 RS-232 9-pin D-sub Port Connects to the PC or the Remote Controller
2
15
ETHERNET Connector Connects to the PC or other Ethernet Controller
16 RESET Button Press the ETHERNET factory reset button to reset to the
factory default definitions
3
IP number − 192.168.1.39
:
Mask – 255.255.255.0
Gateway – 192.168.1.1
17 Power Connector with Fuse AC connector enabling power supply to the unit
1 Illuminates when configuring the EDID
2 Via a null-modem connection
3 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load
its memory with the factory default definitions