Kramer Electronics VS-42H Switch User Manual


 
Operating the VS-42H
13
7.3 Connecting a PC
7.4 Controlling via ETHERNET
You can connect the VS-42H via the Ethernet, using a crossover cable (see
section
7.4.1) for direct connection to the PC or a straight through cable (see
section
7.4.2) for connection via a network hub or network router
1
7.4.1 Connecting the ETHERNET Port directly to a PC (Crossover
Cable)
.
You can connect the Ethernet port of the VS-42H to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the VS-42H during the initial configuration
1 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the
“Ethernet Configuration (FC-11) guide.pdf” file in the technical support section on our Web site:
http://www.kramerelectronics.com