Filter
Top Products
-29-
4.5 Ports
Configuration Function
Enable Jumbo Frames Select to enable jumbo frame support
Port The port number
Link Speed and duplex status with green background - port is link on
Down with red background - port is link down
Mode Select port operating mode
Disabled - disable the port operation
Mode Auto-negotiation Speed capability Duplex capability
Auto Enable 10, 100, 1000M Full, Half
10 Half Disable 10M Half
10 Full Disable 10M Full
100 Half Disable 100M Half
100 Full Disable 100M Full
1000 Full Enable 1000M Full
Force 1000 Full Disable 1000M Full
Flow Control Set port flow control function
v - set to enable 802.3x pause flow control for ingress and egress
[SFP DDM] Click to display DDM information and status of the SFP transceivers
[Apply] Click to apply the configuration change
Notes:
1. For 100M fiber application on Port 4 and Port 5, it is necessary to configure 100 Full for
the port with fiber connection.
2. For 1000M fiber application on Port 6, just leave the default port configuration Auto for
fiber connection.