Filter
Top Products
-44-
Aggregations Enabled to support port trunking in STP. It means a link aggregate is
treated as a physical port in RSTP/STP operation.
Port Protocol Enabled Port is enabled to support RSTP/STP.
Port Edge An Edge Port is a port connected to a device that knows nothing about
STP or RSTP. Usually, the connected device is an end station. Edge Ports
will immediately transit to forwarding state and skip the listening and
learning state because the edge ports cannot create bridging loops in the
network.
Port Path Cost Specifies the path cost of the port that switch uses to determine which port
are the forwarding ports the lowest number is forwarding ports, the rage is
1 ~ 200,000,000 and Auto. Auto means a default cost is automatically
calculated in RSTP operation based on the port link speed.
The default costs are :
Link Speed Auto Default Cost
10Mbps 2000000
100Mbps 200000
1000Mbps 20000
[Apply] Click to apply the configuration change
[Refresh] Click to refresh current configuration
4.10 802.1X Configuration