Filter
Top Products
-41-
4.7 Aggregation
Configuration Description
Group Trunk group number
Port # Click to select the port as member port of the trunk group
[Apply] Click to apply the configuration change
[Refresh] Click to refresh current configuration
[Back] Click to go back to upper menu
Link aggregation function allows to make connection between two switches using more than one
physical links. It can increase the connection bandwidth between two switches. The switch supports up
to four trunk groups and the number of member ports belonging to one trunk group is not limited.
Notes:
1. The LACP enabled ports are not available in this configuration..
2. One port cannot belong to two trunk groups at the same time.
3. The member ports of one trunk group must also belong to same VLAN group and have same
VLAN configuration settings. Otherwise, abnormal operation might be experienced.