Filter
Top Products
-33-
4.6.2 Port-based VLAN ISP Mode
Configuration Description
Joint port Select a port as the joint port for all 5 port-based VLAN groups
[Apply] Click to apply the configuration change
[Refresh] Click to refresh current configuration
[Back] Click to go back to upper menu
Example:
If Port 6 is selected as the joint port, the 5 port-based VLAN groups are configured as follows auto-
matically:
Group 1 - member [Port 1, Port 6]
Group 2 - member [Port 2, Port 6]
Group 3 - member [Port 3, Port 6]
Group 4 - member [Port 4, Port 6]
Group 5 - member [Port 5, Port 6]
Mode Operation :
1. The joint port is the shared member port for all groups.
2. Two member ports are configured in each group.
3. The member ports in same group can communicate with other only.
4. No packet tag is examined.
5. A received packet will not be modified (i.e. tagging or untagging) through VLAN operation till it
is transmitted.