Filter
Top Products
-114-
Control settings:
State : Disable or enable this port function.
Auto Negotiation : Set auto negotiation mode for this port, options -
Auto = enable auto negotiation with the highest capability
Nway = enable auto negotiation with the specified capability
Force = disable auto negotiation and use forced mode
Speed : Set speed for this port (the highest capability if Auto mode)
Port 1- 24 options : 100, 10
G1, G2 ports options : 1000, 100, 10 (depends on module type)
Duplex : Set duplex mode for the selected port, options -
Full = Full duplex
Half = Half duplex
Flows control/Full : Enable or disable flow control function in full duplex
Flows control/Half : Enable or disable flow control function in half duplex
Rate Control/Ingress : Control ingress data rate (incoming bandwidth)
Rate Control/Egress : Control egress data rate (outgoing bandwidth)
The valid range is 0 ~ 1000. (Unit = 100K), 0 = disable rate control
Port Priority : Port-based priority setting
Options - Disable, High, Low
Port Security : Enable or disable port security mode
Click Button:
[Apply] : confirm the changes for the selected ports.