Filter
Top Products
-146-
5.7 Configuration Backup
5.7.1 TFTP Restore Configuration
The function is used to download a new default configuration file from a
TFTP server into the switch. The steps are:
1. Start your TFTP server.
2. Copy the new default configuration file into the TFTP server.
3. In this web page, specify the IP address of the TFTP server, in where
the new default configuration file is stored.
4. Specify Backup File Name of the new configuration file.
5. Click [Apply] to start the download operation.
6. Reset the system to use the new default configuration data.