Filter
Top Products
-29-
Enable 802.1X protocol
Radius client configuration -
Radius server IP : IP address of the Radius server
Shared key : en encryption key for use during authentication sessions
with the specified Radius server. It must match the key used on the
Radius server.
NAS identifier : identifier for this Radius client
Server port : the UDP destination port for authentication requests to the
specified Radius server
Accounting port : the UDP destination port for accounting requests to
the specified Radius server
Per-port 802.1X mode setting:
Auto (Au) - The port is set to the Authorized or Unauthorized state in
accordance with the outcome of an authentication exchange between the
Supplicant and the Authentication Server.
Forced Authorized (Fa) - The port is forced to be in authorized state.
Forced Unauthorized (Fu) - The port is forced to be in unauthorized state.
None (No) - The port is not necessary authorized.
Misc. configuration:
quietPeriod - the period during which the port does not try to acquire a
supplicant
txPeriod - the period the port waits to retransmit the NEXT EAPOL PDU
during an authentication session
suppTimeout - the period of time the switch waits for a supplicant re-
sponse toan EAP request
serverTimeout - the period of time the switch waits for a server response
to an authentication request
reAuthMax - the number of authentication attempts that must time-out
before authentication fails and the authentication session ends.
reAuthPeriod - the period of time after which the connected radius cli-
ents must be re-authenticated