Filter
Top Products
Maintenance
BASIC OPERATION GUIDE 5-7
8
Fit the Grid Cleaner to the notch
and install it into the machine.
9
Pull out the Electrical Charge
Section as far as it will go, then
push it in again after moving it
back and forth several times.
10
Remove the Grid Cleaner and
close the cap.
IMPORTANT: After using the Grid
Cleaner to clean the electrical
charge section, wait 5 minutes
before using the machine.
11
Tap on the upper part of the new
Toner Container several times
and then shake the container
horizontally approximately 10
times to distribute the toner
evenly.
12
Install the new Toner Container
and turn the Toner Container
Release Lever (A) to the right.
A