Filter
Top Products
CHAPTER 4 PRINTER OPERATION
4-3
3. Making a Test Print
Perform this procedure to send a test print command from the
printer’s operation panel.
NOTE
In order to make a test print, you must place a sheet of 8 1/2" x 11"
[A4] paper onto the bypass table in portrait orientation.
1
Refer to “2. Printing with manually fed media” (Page 4-2) and
place an 8 1/2" x 11" [A4] sheet of paper onto the bypass
table in portrait orientation.
2
Press the */ Menu key.
3
Press the N or M key to select “2. Set/user”.
Inch specifications
Menu:
2.Set/user.
Metric specifications
Menu:
2.Set/user
4
Press the Enter key.
5
Press the N or M key to select “2. Set printer”.
Inch specifications
Set/user:
2.Set printer
Metric specifications
Set/user:
2.Set printer
6
Press the Enter key.
7
Press the N or M key to select “2. Test print”.
Inch specifications
Set printer:
2.Test print
Metric specifications
Set printer:
2.Test print
8
Press the Enter key.
A test print will be automatically output.
NOTE
Making a test print from the Web Manager interface
It is possible to use an Internet Web browser on a client computer to
access the Web Manager interface and print out a list of setting
information.
For a more detailed explanation, refer to the Functions Edition (On-
Line Manual).