Filter
Top Products
CHAPTER 6 TROUBLESHOOTING
6-9
7
Close the ejection cover.
8
Close the printer securely.
2 If “Paper misfeed. Remove paper.” appears:
Inch specifications
Paper misfeed.
Remove paper.
Metric specifications
Paper misfeed.
Remove paper.
Paper has jammed in the bypass slot. Perform the following
procedure to remove the jammed paper.
1
Pull out the paper jammed in the bypass slot.
* If the jammed paper is difficult to remove, do not pull too
hard but simply proceed to the next step.
2
Grasp the printer body release lever and pull it toward you.
The printer body will be opened.
3
If the paper is present, remove it from inside the printer.
4
Close the printer securely.
3 If “Paper misfeed. Open front cover” appears:
Inch specifications
Paper misfeed.
Open front cover
Metric specifications
Paper misfeed.
Open front cover
The paper roll has jammed in the indicated paper source. Perform the
following procedure to remove the jammed paper.
1
Open the front cover.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.