Filter
Top Products
CHAPTER 2 PRIOR TO SET-UP
2-4
2 3 4
7
8
99
1
5
6
#
$
%
^
@
0!
(2) Operation Panel
1 Ready indicator
This indicator is lit when the printer is on-line and goes out when it
is off-line. In addition, the indicator flashes while the internal server
computer is starting up.
2 Data indicator
This indicator flashes during printing.
3 Attention indicator
This indicator is lit when an error has occurred.
4 On Line key
Press this key when you want to switch the printer on- and off-line.
5 Message display
Machine status and errors are indicated on the message display.
6 MNOP Cursor keys
Use these cursor keys in order to select the various setting modes.
In addition, the N or M key may be used to select a paper tray.
7 Roll Cut key
Press this key when a new paper roll is set. Also press to force a
roll cut during output and to cancel printing.
8 Stop key
This key is used to cancel printing as well as in the configuration of
some settings to clear entered values.
9 Start key
Press this key to print to the currently set paper roll when the print
data’s page size and/or media type do not match those of the
current roll.
0 Enter key
Press this key when you want to register a setting. The Enter key
is also used to return to the printer to standard mode from energy
saver or sleep mode (Page 2-6).
! */Menu key
Press this key to configure the printer’s settings and output test
prints. (When the */Menu key has been pressed and one of the
printer setting screens is being displayed, the Ready indicator will
go out and the printer will be off-line.)
@ Internal paper jam indicator
This indicator is lit when a paper jam has occurred inside the
printer.
# Manual feed indicator
This indicator is lit when the manual feed has been selected and
when a paper jam has occurred in the manual feed mechanism.
$ Paper tray 1 indicator
This indicator is lit when the optional roll unit has been installed
and paper tray 1 has been selected, as well as when a paper jam
has occurred in paper tray 1.
% Paper tray 2 indicator
This indicator is lit when paper tray 2 has been selected as well as
when a paper jam has occurred in paper tray 2.
^ Paper tray 3 indicator
This indicator is lit when paper tray 3 has been selected as well as
when a paper jam has occurred in paper tray 3.