Filter
Top Products
2.1 Available Scanning Features
2
2-3
Scanning Operations Chapter 2
Operation Description
For more details on functions and operating procedures, refer to the manual for the
printer controller.
1
Press the [Scan] key.
The Destination screen appears.
✎
Note
If the printer controller is not installed, the Destination screen does not ap-
pear when the [Scan] key is pressed, and the copier does not enter Scan
mode.
2
Specify the appropriate settings.
❍
Specify the recipient (where
the scan data will be sent) and
the scanning mode, and then
specify any other necessary
settings.
3
Press the [Start] key to start scanning and sending the data as
specified.