Filter
Top Products
LaCie 2big Triple
User Manual
page 18
Setup
Connect the drive to the computer and turn on the
drive.
Select Utilities from the Go menu in the Finder
menu bar.
In the Utilities folder, double-click Disk Utility.
e Disk Utility window will open. Select the volume
labeled LaCie Hard Disk from the list of available
hard disks on the left side of the window.
Select the Partition tab.
From the Volume Scheme: menu, choose the
number of partitions you want to divide the drive
into (Mac OS X gives you the option of dividing the
drive into at most 16 partitions). You can adjust the
size of each partition using the slide bar between the
partitions in the Volume Scheme: area.
In the Volume Information section, enter a name
for each volume (partition), choose the volume for-
mat.
Once you have finalized the volume options, click
Partition. Click Partition again when the alert
message appears to continue.
Mac Disk Utility will format and partition the disk
according to your settings, and your drive will be
ready to use.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Fig. 2.3.3.
ImpOrTANT INfO: Please refer to section
2.3.1. File System Formats, for a more detailed
comparison of the various file system formats.
CAUTION: Following these steps will erase
everything from the 2big. If you have informa-
tion that you want to protect or continue to use,
back up this information before performing these
steps.
ImpOrTANT INfO: Apple recommends that
unless you have a specific reason to use the UNIX
File System (UFS), you should use the Mac OS
Extended format because it provides a more famil-
iar experience to Macintosh users.
2.3.3. Formatting for Mac Users■