LaCie d2 DVD±RW Drive
User Manual
page 20
Getting Connected
Fig. 2.4.B
LaCie Ltd. XXXXXX
Serial Number XXXXXXXXX
ON
OFF
2.4. Connecting the FireWire 400 Cable
TeChNICAl NOTe: For more information on
FireWire connections, see the following sections:
1.4, Cables and Connections
4.5, FireWire Questions and Answers
❖
❖
Connect the power supply cable (see section 2.2).
Connect the FireWire 400 cable to a FireWire 400
port on the back of the drive (Fig. 2.4.A).
Attach the other end of the interface cable to an
available FireWire 400 port on your computer (Fig.
2.4.B).
Your drive should now be ready for use. To verify that
your drive is correctly installed and communicating
with your computer, follow these steps:
Mac Users
In the Apple menu, click on About is Mac, then
More Info. is will open the Apple System Profiler.
Your drive should be listed in the Hardware category.
Windows Users
Right click your My Computer folder and select
Properties. Click on General. Your drive should be
listed.
1.
2.
3.
4.
Fig. 2.4.A