LaCie Brick Hi-Speed USB 2.0
Desktop Hard Drive User’s Manual
3.1.2. Mac Users
• Mac OS 9.x – Install and use LaCie Silverlining Pro, which is included with your drive.
• Mac OS 10.x – Use the Apple Disk Utility application, which is native to the operating system.
For instructions on installing and using Silverlining Pro, please refer to the Silverlining manual, located on your LaCie Storage
Utilities CD, in PDF format.
Formatting And Partitioning Using Mac OS 10.x
Warning!
Following these steps will erase anything that is on the hard drive. Therefore, if you have information that
you want to protect or continue to use, backup this information before performing these steps.
1) Connect the drive to the computer via the USB 2.0 port.
2) Once the drive mounts onto the desktop, go to the Menu Bar, and open Go.
3) From the Go menu, click on Applications.
4) In the Applications menu, open the Utilities folder, and then double-click Disc Utility from the Utilities folder.
5) The Disc Utility window will open. In the
left side of the window will be a list of the
available hard disk drives. You should see a
volume that represents your internal hard
drive, and one that reads LaCie.
6) Select the LaCie drive, and then click on
the Partition tab.
7) From the Volume Scheme: button, choose
the number of partitions you want to divide
the drive into by clicking on the pull down
menu starting with Current (Mac OS 10.x
gives you the option of dividing the drive into
at most 8 partitions). You can customize the
size of the partitions by using the slide bar
between the partitions in the Volume
Scheme: area.
Using Your LaCie Drive
page 15