Filter
Top Products
Frequently-Used Commands
ETS Installation Guide 65
Command Option(s) Description
{SHOW/MONITOR} PORT 2
Displays the port’s configuration characteristics
once (Show) or continually every three seconds
(Monitor). Counters and Status keywords can be
added.
COUNT rows
WIDTH cols
Sends an ASCII data stream to the port for the
specified number of rows and/or columns.
TEST PORT 2
option
POSTSCRIPT Sends a PostScript test page to the port.
Protocol Commands
In the following table, PROTO is an abbreviation for the optional keyword
PROTOCOL.
Table F-3. Frequently-used Protocol Commands
Command Option(s) Description
{EN/DIS}
Enables or Disables the AppleTalk protocol for
the ETS.
DEFINE PROTO
APPLETALK option
ZONE newzone Places the ETS in a zone other than the default.
{EN/DIS}
Enables or Disables the TCP/IP protocol for the
ETS.
GATEWAY ipaddr See DEFINE SERVER GATEWAY ipaddr.
IPADDRESS
ipaddr
See DEFINE SERVER IPADDRESS ipaddr.
LOADHOST ipaddr See DEFINE SERVER LOADHOST ipaddr.
DEFINE PROTO IP
option
NAMESERVER
ipaddr
Specifies the IP address of the host that will
resolve text host names into their numeric
equivalents for TCP/IP connection attempts.
DEFINE PROTO
LANMAN option
{EN/DIS}
Enables or Disables the LAN Manager protocol
for the ETS.
{EN/DIS}
Enables or Disables the LAT protocol for the
ETS.
DEFINE PROTO LAT
option
LICENSE string
Enables LAT on multi-port ETS device servers.
Enter the license string obtained from Lantronix.
{EN/DIS}
Enables or Disables the NetWare (IPX) protocol
for the ETS.
DSCONTEXT
string
Configures the NetWare Directory Services
context in which the ETS is located. For more
information about NDS contexts, see your NDS
documentation.
DSLICENSE string
Configures the NetWare Directory Services
license needed to enable NDS on your ETS.
Enter the license string obtained from Lantronix.
DEFINE PROTO
NETWARE option
DSTREE string
Configures the NetWare Directory Services tree
in which the ETS is located. For more
information about NDS trees, see your NDS
documentation.
DEFINE PROTO NATIVE
Configures the ETS to use the “native mode”
frame format.