Filter
Top Products
8: Network Settings
EDS User Guide 51
Network 1 Ethernet Link
This page shows the current negotiated Ethernet settings and lets you change the speed and
duplex settings.
To view and configure the Ethernet link:
1. Select Network on the menu bar, if you are not already in the Network web page.
2. Select the Link submenu.
Figure 8-4 Network 1 Ethernet Link
The Status table shows the current negotiated settings. The Configuration table shows the
current range of allowed settings.
3. Enter or modify the following settings:
Table 8-5 Network 1 Ethernet Link
4. Click Submit. The changes take effect immediately.
Network 1-Ethernet Link
Settings
Description
Speed Select the Ethernet link speed. Default is Auto.
Duplex Select the Ethernet link duplex mode. Default is Auto.