9: Line and Tunnel Settings
EDS User Guide 67
Modem Control Asserted
A connection is attempted when the modem control pin is asserted in the serial line.
Modem Emulation
A connection is attempted by an ATD command.
To configure Connect Mode for a specific tunnel:
1. Select Tunnel on the menu bar, if you are not already in the Tunnel web page.
2. Select a tunnel number at the top of the page.
3. Select Connect Mode. The Connect Mode page for the specific tunnel appears.
Note: The VIP and Host
Mode options are supported
in all products except XPort
AR.
The CP Output option is
only supported in XPort Pro
and XPort AR.
Figure 9-15 Tunnel 1 Connect Mode