Filter
Top Products
3: Installation of EDS-MD4/8/16 Device Servers
EDS-MD User Guide 26
Technical Specification
Category Description
NETWORK INTERFACE
Ethernet Ports 3 RJ45 10Base-T/100Base-TX/1000Base-T Ethernet ports
Auto sensing
Automatic MDI/MDI-X crossover
Full duplex IEEE 802.3x flow control
Half-duplex back pressure flow control
Left LED Indicator
See
Table 3-5.
Right LED Indicator
See
Table 3-5.
Isolation from internal circuit 1.5 KVAC
Isolation from adjacent port 1.5 KVAC
USB INTERFACE
USB Ports 2 of USB-A Host, USB 2.0, Full Speed only
Output Capability 0.5 A
Isolation from internal circuit 1.5 KVAC
Isolation from adjacent port 1.5 KVAC
SERIAL INTERFACE
Serial Ports Options of 4-port, 8-port, 16-port
RS232 Serial Ports DTE via RJ45 connectors
Baud rate Selectable from 300 bps to 921600 bps
Serial Line Formats Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Control DTR/DSR
Flow Control Hardware: CTS/RTS
Software: XON/XOFF
Serial LED Indicators
See
Table 3-4.
Protection from ESD 15kV (human body model)
Isolation from internal circuit 1.5 KVAC
Isolation from adjacent port 1.5 KVAC
Reset-to-Default-Parameters
Switch
Side panel pin-hole recessed push button switch
POWER RATING
Power Input AC Connector IEC60320 C14 receptacle with no power switch
Power Usage 100-240 VAC, 50/60 HZ, 0.4M