Lantronix EDS-MD16 Server User Manual


 
11: Maintenance and Diagnostics Settings
EDS-MD User Guide 71
Table 11-9 Ping Settings
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, click Diagnostics in the menu and select Ping.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the EDS-MD4/8/16 to an Internet host, showing how many hops
the packet requires to reach the host and how long each hop takes. If you visit a web site whose
pages appear slowly, you can use traceroute to determine where the longest delays are occurring.
Table 11-10 Traceroute Settings
To Perform a Traceroute
Using Web Manager
To perform a Traceroute, click Diagnostics in the menu and select Traceroute.
Using the CLI
To enter the command level: enable
Using XML
Not applicable.
Diagnostics: Ping Settings Description
Host Enter the IP address or host name for the EDS-MD to ping.
Count Enter the number of ping packets EDS-MD should attempt to send to the
Host. The default is 5.
Timeout Enter the time, in seconds, for the EDS-MD to wait for a response from
the host before timing out. The default is 5 seconds.
Diagnostics:
Traceroute Settings
Description
Host Enter the IP address or DNS hostname. This address is used to show the path
between it and the EDS-MD when issuing the traceroute command.