Filter
Top Products
11: Maintenance and Diagnostics Settings
EDS-MD User Guide 72
Log
Table 11-11 Log Settings
To Configure the Diagnostic Log Output
Using Web Manager
To configure the Diagnostic Log output, click Diagnostics in the menu and select Log.
Using the CLI
To enter the command level: enable -> config -> diagnostics -> log
Using XML
Include in your file:
<configgroup name=”diagnostics”>
and
<configitem name=”log”>
Memory
The memory information shows the total, used, and available memory (in kilobytes).
To View Memory Usage
Using Web Manager
To view memory information, click Diagnostics in the menu and select Memory.
Using the CLI
To enter the command level: enable -> device, show memory
Using XML
Include in your file: <statusgroup name=”memory”>
Diagnostics: Log Description
Output Select a diagnostic log output type:
Disable - Turn off the loggin feature.
Filesystem - Directs logging to /log.txt.
Line (1, 2, 3 and 4) - Directs logging to the selected serial line.
Max Length Set the maximum length of the log.txt file.
Note: This setting becomes available when Filesystem is selected.