Filter
Top Products
5: Commands and Levels
EDS-MD Command Reference 102
ssh <optClientUsername> <host>
Begin SSH session on network <host>.
The optClientUserName must match an SSH Client: Users confi-
guration entry.
Use "" in optClientUserName to prompt for host username and
password.
ssh <optClientUsername> <host> <port>
Begin SSH session on network <host>:<port>.
The optClientUserName must match an SSH Client: Users confi-
guration entry.
Use "" in optClientUserName to prompt for host username and
password.
ssl
Enters the SSL configuration level.
telnet <host>
Begin telnet session on network <host>.
telnet <host> <port>
Begin telnet session on network <host>:<port>.
trace route <host>
Trace route to destination
trace route <host> <method>
Trace route to destination using TCP, ICMP, or UDP
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
write
Stores the current configuration in permanent memory.
xml
Enters the XML level.
filesystem (filesystem) level commands
cat <file>
Show the contents of a file
cd <directory>
Change the current directory to the specified directory
clrscrn
Clears the screen.
cp <source file> <destination file>
Copy an existing file
dump <file>
Show contents of a file as a hex dump
exit
Exits to the enable level.
format
Format the file system and delete all data (excluding data at-
tached to USB drives)
ls
Show all files and directories in the current directory
ls <directory>
Show all files and directories in the specified directory
mkdir <directory>
Create a directory
mv <source file> <destination file>
Move a file on the file system
pwd
Print working directory
rm <file>
Remove a file
rmdir <directory>
Remove a directory
show
Show file system statistics
show history
Displays the last 20 commands entered during the current CLI
session.
show tree
Show all files and directories from current directory
tftp get <source file> <destination file> <host>
Get a file using TFTP
tftp get <source file> <destination file> <host> <port>
Get a file using TFTP
tftp put <source file> <destination file> <host>
Put a file using TFTP
tftp put <source file> <destination file> <host> <port>
Put a file using TFTP
touch <file>
Create a file
ftp (config-ftp) level commands
clrscrn
Clears the screen.
exit
Returns to the config level.