Lantronix EDS-MD4 Switch User Manual


 
5: Commands and Levels
EDS-MD Command Reference 54
Note that quotes must enclose the value if it contains spaces.
aes encrypt key text <text>
Sets the accept tunnel AES encrypt key with up to 16 bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains spaces.
block network disable
Forwards (tunnels) network data in accept mode tunneling.
block network enable
Discards all data coming in from the accept mode tunnel before
forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in accept mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the accept mode tunnel (generally used for debugging).
clrscrn
Clears the screen.
credentials <text>
Selects the RSA/DSA certificates by name for the SSL server.
default accept mode
Restores the default accept mode as "always".
default local port
Uses the default port number as the local port for accept mode
tunneling.
The default port is 10000 + #, where # is the line number for
this tunnel.
default protocol
Restores the default protocol as "TCP".
default start character
Defaults the accept mode start character.
default tcp keep alive
Restores the default 45 second accept mode TCP keep alive
timeout.
email connect <number>
Sets an email profile to use to send an email alert upon estab-
lishing
an accept mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon closing
an accept mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained upon
establishing
an accept mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing an accept mode
tunneling
connection.
flush start character disable
Enables forwarding of the accept start character into the net-
work.
flush start character enable
Disables forwarding of the accept start character into the net-
work.
kill connection
Disconnects the active accept mode tunneling connection.
local port <number>
Sets the port to use for accept mode tunneling.
<number> = number of the port to use.
no aes decrypt key
Removes the accept tunnel AES decrypt key.
no aes encrypt key
Removes the accept tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection.
no email connect
Discontinues sending email alerts upon establishing an accept
mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing an accept mode
tunnel.