Lantronix LPS1-2 Printer User Manual


 
5-1
5: NetWare Configuration
The EZWebCon configuration software is the easiest way to configure the MPS. The fol-
lowing sections cover print configuration methods for NetWare hosts.
Note: The MPS needs an IP address before you can use EZWebCon. See
Setting the IP Address on page 4-1 for instructions.
This chapter explains creating NDS print queues with NetWare Administrator and with
the PCONSOLE Quick Setup option. To create NDS print queues, you must be running
NetWare version 4.x with NDS capabilities.
If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you
may configure bindery print queues using QINST (bindery only) or PCONSOLE. For
more information, see the NetWare chapter of the Print Server Reference Manual located
on the CD-ROM.
5.1 NDPS Printing
Lantronix Terminal and Print Servers support Novell’s NDPS for printing using the No-
vell NDPS Gateway. For instruction on setting up NDPS, refer to your Novell documen-
tation. Lantronix also provides information on setting up NDPS in our FAQs on our
support web site (http://www.lantronix.com/support/).
5.2 NDS Print Queues
5.2.1 Obtain an NDS License
If you wish to create NDS print queues, you must read and complete an NDS registration
form via one of the following methods:
Using a forms-capable Internet browser, navigate to the Lantronix World Wide
Web site (www.lantronix.com), go to the Technical Support section, and find the
Novell NDS Registration link.
Send email to support@lantronix.com. You will receive a blank registration
form that can be completed and returned to Lantronix.
If you don’t have Internet access, contact a Lantronix technical support represen-
tative for assistance. Contact information is provided in Appendix A.