Filter
Top Products
Protocol Configuration Basic Configuration
4 - 2
If another user is currently the privileged user for the MSS, use the Set
Privileged Override command to forcibly become the privileged user. To
relinquish privileged status, enter the Set Noprivilege command.
The privileged password can be changed with the Change Privpass
command. Specify a new password of up to six alphanumeric characters.
Figure 4-2: Changing Privileged Password
4.2.2 Login Password
The login password is required for remote console logins. The default login
password is access. To specify a new login password, use the Change
Loginpass command and specify a new password of up to six alphabetic
characters.
Figure 4-3: Changing Login Password
4.3 Protocol Configuration
Certain options can be conÞgured for each of the protocols supported by the
MSS. For more information on protocol conÞguration, refer to MSS Reference
Manual on the CD-ROM.
4.3.1 TCP/IP Parameters
¥ Subnet Mask: This mask allows the server to decide at connection
time whether a given TCP/IP host is part of the local network
segment so that packets can be routed properly. A default subnet
mask is created automatically when the MSSÕs IP address is
conÞgured, but it can be overridden.
Ex: CHANGE SUBNET MASK 255.255.255.0
¥ Name Resolution: Hosts on TCP/IP networks generally have a text
hostname and a numeric IP address. The MSS can resolve text host
names into the numeric equivalents needed for most connections,
provided that a DNS (domain name server) has been conÞgured.
Ex: CHANGE NAMESERVER 192.0.1.167
Local>> CHANGE PRIVPASS “walrus”
Local>> CHANGE LOGINPASS “badger”